Stair Nose Molding - 3/4" in. Thick x 3 1/4" in. Wide x 96 in. Length
30-Day Money-Back Guarantee
At Easiklip we understand how important it is that your home renovation be everything you dreamed of. Choosing the right products is not always easy and we are here to help.
If you’re not completely satisfied with your purchase, you can return it for a refund within 30 days of delivery. It really is that EASI.
Please note that only the costs of your items purchased will be refundable. Any shipping costs you paid to receive your items will not be refunded. You will need to return all your purchased items to us and you will be responsible for return shipping costs.
By purchasing any Easiklip product, you acknowledge that you have read, understand and agree to all of the following terms and conditions pertaining to returns, cancellations and refunds.
How Do You Qualify for a Refund?
Please ensure that you product is:
- In its original packaging
- In the same condition as it was when it arrived at your home or job site. It must be in “like new” condition and suitable for resale.
- Not used, installed, or marked in any way
You must complete all of the following within 30 days of receiving your order:
- Contacted our customer care staff at email@example.com to advise that you will be returning all or part of your order
- Include our Order# in your correspondence
- Have your order packed and ready to ship
Full Order Returns
For a full refund of your payment (minus initial shipping costs), you must return absolutely everything you received from us. All items must also be in their original packaging. Let us know once you have everything packaged up and ready to go.
We will then arrange a pickup time for the products. Please note that you will be responsible for return shipping costs.
Partial Order Returns
If you’re looking to return only a portion of your order we are happy to help you out!
Please take note of our Partial Order Return Policy:
If you would like us to arrange partial order return pick up, you will be responsible for covering the return shipping costs
All Partial Order Returns must be returned in their original condition and packaging
All Partial Order Returns must be returned within 30 days of their delivery date
Our Fine Print
24 Hour Order Cancelation: after placing an order, you may cancel or modify your order without penalty. After 24 hours, our regular return policy applies.
Delivery: Delivery dates are estimates. You should not schedule installation until you receive the product.
When your flooring is delivered, products should be inspected for defects or damage. IF YOU SEE DAMAGE, note the damage on the delivery papers that your delivery driver asks you to sign. Ask the driver to provide you with copies of these papers for your records. Please also take detailed photos of any visible damage. If extensive damage exists, you should refuse to take the product(s) into your possession. Take detailed photos of all damage and call Easiklip customer care immediately at 855-539-5547 to determine a course of action.
Rest assured that we will always take care of you and make sure you have all the flooring you need, even if any gets damaged in the first delivery. Just reach out to our friendly customer care team and we will resolve your issue as quickly as possible.
At Easiklip, we make every attempt to choose delivery carriers that provide exceptional service.
Local Delivery: For safety reasons, your flooring order is delivered to an accessible, outdoor location like a curbside. Carriers are equipped with a pallet jack and liftgate only, suitable for unloading one pallet of flooring at a time.
Underlayment and moldings may be delivered separately via UPS or similar small package delivery services. Such orders will be delivered to your door.
Installation: It is your responsibility to inspect your order for grade, color, finish, defects and other issues. If you are dissatisfied, DO NOT INSTALL. You must fully acclimate flooring to environmental conditions in the installation area for a minimum of 3 days prior to installation. You are solely responsible for checking moisture levels in your flooring product and subfloor, following installation instructions, and ensuring that Easiklip flooring is appropriate for your job site conditions prior to installing.
Returns/Exchanges and Refunds: Returns and exchanges must be made within 30 days of receipt and only with a valid receipt of purchase. Returns or exchanges are not permitted on opened boxes, special or custom orders, and clearance items. Defective product may be exchanged, prior to installation, within 30 days of receipt. Installed product is considered accepted by you and may not be exchanged or returned for any reason. Shipping and delivery charges in connection with purchase are non-refundable. Shipping costs relating to a return or exchange are your sole responsibility.
After we have received your product, we will complete a quality inspection.
Refunds are issued 3-7 business days after the product has been received by the warehouse in good, resalable condition.
For refunds, credit or debit card purchases will be credited back to the account or tender type used for this purchase.
Return to Warehouse: If you wish to avoid paying shipping fees associated with your return order, you may elect to bring your return back to your nearest Easiklip warehouse by yourself. Please arrange a drop off appointment time with our customer care team prior to your drop off. All other return and refund conditions still apply.
Returns over 30 days may incur up to a 35% non-negotiable restocking fee; a 10% non-negotiable restocking fee is assessed for all exchanges.
Limited Warranty and Other Limitations: A copy of the Easiklip Warranty for Solid Oak Hardwood Flooring is available at www.easiklip.com/warranty. You may request a paper copy by calling Customer Care at (855) 539-5547.
Chemical Sensitivity and Hyperosmia: If you, or anyone in your home, are highly chemically sensitive or experiences hyperosmia (a heightened or increased sense of smell), please be advised that despite our flooring and coatings being free of any harmful VOCs (volatile organic compounds), we cannot guarantee that individuals with these conditions will not be affected. Just as olive oil and canola oil have distinct smells, so to do the oils used in our coatings. Our coatings are UV cured months before the flooring is available for purchase and cases where consumers will still find smells offensive are extremely rare. Nevertheless, if you suffer from either of these conditions, we advise that you order a single box of flooring (15 sq ft) BEFORE purchasing a full order so that you may determine whether or not you can tolerate Easiklip flooring in your home. Please be advised that any returns based on the aforementioned conditions or general complaints related to product odors will be subject to all regular conditions of the Easiklip Returns, Cancellations and Exchanges policy, including, but not limited to shipping fees and restocking fees.
Still have questions? Give us a call at 1-855-539-5547, or send us an email at firstname.lastname@example.org
Before we get into the warranty, you must understand the limitations of real wood as a flooring material.
It is paramount to set the performance expectations for your new wood flooring and the flooring finish up front. In doing so, we believe in being realistic and honest.
Wood is Porous – Avoid Water
Solid wood flooring is hygroscopic. That means it absorbs water the same way as your kitchen sponge:
- It will absorb moisture when exposed to water either in liquid form or vapor form. Water can come from the atmosphere (relative humidity) or from the subfloor (concrete, plywood, etc.)
- When it absorbs water, the wood swells in size and may cup or crown.
- When it dries out, the wood shrinks in size and may also cup.
Each wood shrinks and swells at a lesser or greater rate unique to the species. This is a simple mathematic formula, and most species have been tested and recorded by the US Forest Products Laboratory. For each gain of 1% of moisture content a particular species of wood will gain X% in width. This formula represents merely the physical laws that apply to that individual species of wood, and they are indisputable.
So, the bottom line is, no manufacturer can guarantee or warranty wood flooring to be impervious to water.
The Properties of Finishes
All finishes, no matter how hard or thick will scratch and dent. For example, if you drag a heavy object across the floor, it will scratch the finish and perhaps the wood itself.
All finishes will dent when pressed hard enough. Depending on the hardness of the wood underneath the finish, the wood itself will dent to the degree in direct proportion to the wood’s hardness.
All finishes will wear from abrasion. If you allow sand and grit to lie on the floor, foot traffic will wear the finish down. Excessive foot traffic will initially dull the finish in these areas, then eventually wear down to bare wood if not recoated.
Again, no flooring manufacturer warrants their finish to be impervious to wear, much less abuse. Please see section below on Warranty Voiders.
However, floor finish wear-ability has increased, and new formulas are coming on the market all the time. Easiklip uses the best quality finishes for added durability. While our finishes are a vast improvement from a few years ago, no finish is impervious.
The Warranty Voiders
Here is a list of standard warranty “Voiders” by most hardwood floor manufacturers and Easiklip:
- Soaking in water from above or below.
- Wet mopping and failure to clean up spills.
- Steam cleaner used in any way.
- Wet subfloor.
- Failure to protect the floors from sand or grit, pets, high heels, chair/furniture w/o protectors, lack of mats at entryways, excessive foot traffic, household chemicals, abrasive cleaners, steam cleaners, excessive sunlight, excessive heat, etc.
Also, one should know most finish warranties don’t consider a change in sheen/gloss levels to be a defect – only peeling or complete wear through is.
Easiklip carries a 25-year warranty against surface wear (not surface scratches) for domestic applications and a 3-year warranty against surface wear in the case of Commercial Applications. The reason is that the amount of foot traffic is much higher in a commercial setting.
Manufacturers exclude almost all causes for possible product failure in the fine print. If there is a manufacturing process failure, such as finish adhesion, it will almost always appear within one year, and the warranty covers you.
Reputable flooring manufacturers quickly take advantage of the latest improvements to finishes and engineering as they become available. It’s in their best interest to provide the best performance. As a result, similar flooring products are roughly equal in performance, regardless of warranty.
Our approach to warranties is to be realistic about product performance and equally open about our warranty and its limitations. We reserve the fine print for legalese.
Easiklip uses the latest technological advances in finish and engineering and always offer the finest solid hardwood floors on the market.
What Does Easiklip’s Limited Warranty Cover?
This Warranty comes into effect from the date of Original Purchase. The Original dated Purchase Invoice will need to be submitted. If purchased online, your Order Confirmation email will suffice as proof of Original Purchase. We recommend printing your proof of Original Purchase and storing it in a safe place. The Warranty can only be invoked if all of the conditions detailed below have been fulfilled. Please consult the distributor if you have any doubts.
(1) The Warranty only applies to the original purchaser of the floor. The person deemed to be the first owner is the person stated as the buyer on the original purchase invoice. This Warranty is not transferable.
(2) The Warranty only applies to defects inherent to the material supplied. This is understood to mean any material or production defect acknowledged by the manufacturer, including incorrect machining or pre-finishing.
(3) The Warranty can only be invoked if the surface area damaged for each board is greater than 1cm2. All claims against surface wear must be easily visible and be at least 10% of the entire floor.
(4) It must be possible to provide proof of strict compliance with the manufacturer’s installation and maintenance procedures. These procedures are located in the fitting instructions leaflets contained in the boxes. In the unlikely event of these not being present, copies should be requested from the distributor before installation. Where the purchaser does not fit the floor personally, the installer must receive a copy of the Installation Instructions for completion.
(5) Damage of a mechanical nature, such as scratches (for example, caused by dragging furniture over the floor) or surface damage caused by falling objects are NOT covered by this Warranty. Gloss reduction is not considered surface wear. We recommend using protective felt pads fitted to table and chair legs, and in the case of wheels or castors, these must be housed inside felt backed holders.
This Warranty does not cover claims regarding damage such as scratches, indentations, or discoloration, resulting from lack of proper maintenance, misuse, negligence, spiked-heel shoes, pets, insects, water, moisture, fire, pebbles, sand, or other abrasives, insufficient protection on furniture, wet-mopping, excessive heat or dryness or failure to maintain proper levels of humidity.
(6) The ingress of sand, grit or other abrasive materials should be prevented. Please install proper matting at the entrance(s).
(7) We prohibit the use of any adhesive tape on the flooring at any time during installation or thereafter. This includes tapes that are specially made for wood flooring, such as blue or green masking tapes. Use of tape may void this Warranty and no claims will be addressed in regards to defects in the finish as a result of the use of tape.
(8) The floor may not be installed in damp areas such as bathrooms.
(9) Moisture left on the floor and/or cleaning that is too wet and/or the use of inappropriate cleaning products must be avoided at all times.
(10) All Solid Timber Flooring MUST BE INSPECTED before and during Installation. Boards with visible defects must not be installed under any circumstances. We assume that any flooring that has been installed was clear of any visible defects. No credit will be given for boards that have been installed with visible defects or variances. The distributor must be informed within 15 days of delivery of any such defects, and defective material will need to be returned to the distributor for this to be replaced.
(11) The cost of removing and re-fitting such defective material is not the responsibility of the distributor or the manufacturer. In the case where the floor is fitted by a professional Solid Timber Floor fitter, the removal and re-fitting costs must be sought from them and in the case of the purchaser fitting the floor themselves, any such costs will be borne by the purchaser.
(12) The distributor or manufacturer can never be held liable for any secondary damage.
(13) Wear must be notified in writing to the distributor at the latest within 30 days of it being noticed.
(14) The distributor or manufacturer reserve the right and must be offered adequate opportunity to inspect the complaint on-site and where applicable, to inspect the floor in its installed condition.
(15) In the case where a complaint is upheld, only Solid Timber Flooring of a like for like basis will be supplied as replacement material via the distributor. There will be no other form of compensation.
(16) The Warranty is on a sliding scale. When it is applied, account will be taken of a fractional reduction in value caused by wear and tear of 1/25 per year
(17) The services provided as part of this Warranty do not extend the original Warranty Period
- Easiklip will, at its option, either replace or refund the purchase price of any flooring found to be defective, before installation, more than the 5% of the miss-milled/miss-graded/miss-finished product allowed to be included under Standard Industry Trade Practices.
- Easiklip will, at its option, either replace or refund, upon return to the manufacturer, the purchase price of any uninstalled flooring found to be at a higher moisture content, when taken from the plastic sealed carton than the 6-9.5% moisture content the manufacturer represents the flooring to be produced.
Note: It is the installer’s responsibility to check the moisture content first and deem it acceptable for the site. The installer must also inspect the flooring as it is installed and set aside or cross-cut out defects found before installation. Once the flooring has been installed, the installer has deemed the flooring acceptable, and the manufacturer assumes no further responsibility for defects visible at the time of installation which has been installed.
Pre-finished flooring is flooring supplied with a film finish already applied at the Factory. Industry Standards allow up to 5% of the flooring shipped, to contain milling, handling, and grade defects as well as occasional finish defects.
- The Easiklip warrants to the original purchaser, that for a period of 25 years from the date of purchase that the finish shall not peel or blister from the floor under normal Residential, (as opposed to Commercial), use conditions – see exceptions below.
- Easiklip warrants that the finish will not wear through to the bare wood for a period of 25 years from the date of purchase under normal Residential, (as opposed to (Commercial), use conditions – see exceptions below. Note: changes in Gloss level are not considered a defect.
- Easiklip warrants this flooring can be re-screened / refinished by a professional refinisher, (for repair purpose/to change stain color) – see exceptions below.
- Easiklip offers a 25-year structural warranty to the original purchaser. Please be sure to:
- Follow the latest copy of the Product Installation Instructions (from inside the carton or from the retailer) and do not install this flooring in unsuitable (wet/dry) conditions.
- Follow the Product Maintenance Instructions as issues will occur if the wrong products are used and the floor is not properly protected.
It is the installer’s responsibility to follow correct Easiklip Installation Instructions, which include complete instructions, in much greater detail than outlined below, on the following topics:
- Inspect the flooring upon arrival to ensure:
- You received the quantity, species, grade and size flooring you ordered.
- There was not any handling damage or water damage in transit.
- Prepare an installation plan, based on testing, at the flooring site, of both the subfloor for acceptable moisture content and the site atmosphere for the proper range of relative humidity. The installer must keep a record, which lists the results of all the tests taken. Request a copy of NWFA’s job site Checklist on which to record these results, as the manufacturer will request a copy of the job record in reviewing any claims made against this warranty.
- Make sure the flooring received meets the buyer’s expectations before installation and they approve such issues as:
- The color/grain range and the color change to be expected in the species chosen and how the freshly installed floor may vary in look from the aged samples from which their selection was made.
- Establish that the site and subfloor are suitable for the installation method chosen and advise the buyer. Correct any deficiencies before commencing installation.
Install the flooring properly. This includes:
- Use of the proper moisture barrier or underlayment, mastic, glue, or nails/staples.
- Perform adequate color/grain selecting as you install the floor, to not install “odd colored/grained” pieces in conspicuous places, as the owner may reject them later.
- Protect the flooring and the finish during installation and protect the flooring afterward from construction and move-in foot traffic to minimize scratching, wear, and construction debris.
- Instruct the end user in proper floor & maintenance care as well as the need to maintain appropriate relative humidity levels at the site. We recommend installing a Data Logger to assure that the environment has been kept according to the warranty requirements.
What is not covered under this Limited Warranty includes but is not limited to:
- Claims made on pieces of flooring installed with visible defects as it is the installer’s responsibility to set aside pieces with visible defects and not use them. Flooring, once installed, is considered acceptable by both the installer and buyer.
- Claims made on pieces of flooring installed with excessive color, grain variation, or wood character as it was the installer’s responsibility to inspect the flooring before installation and install the floor in a random and harmonious mix.
- Color changes in the wood as it ages or from exposure to sunlight.
- Variation in the color/graining/grade of the installed floor from showroom samples, as the samples most likely will have aged and changed in color, gaining the patina of a partially or fully aged floor. Some grades cannot show all examples of the wood character due to the limited size of the sample board.
- Excessive swelling or shrinkage or another movement, such as cupping in the flooring caused by a change in the moisture content due to extreme dryness or humidity on the site which is outside the recommended 40% -65% relative humidity range to be maintained for the product.
- Finish peel, excessive swelling or cupping in the flooring caused by an increase of moisture content in the wood from moisture sources below the floor such as a wet sub-floor, or from moisture from above from such sources as spills, excessive wet mopping, pets, etc.
- Insects if it occurs after the date on which the product passes out of the manufacturer’s control.
- Damage, excessive movement or defects caused by:
- Improper handling or storage after the product has been delivered and accepted by the buyer.
- Improper preparation or excessive moisture content of the surface on which this product is installed.
- Excessive moisture from natural disasters such as flooring, broken pipes, etc., in which case your homeowner insurance company should be contacted.
- Excessive wet mopping, steam cleaning, or failure to clean up spills and standing water.
- Improper installation whereby the Product Installation Instructions are not followed.
- Improper maintenance and failure to follow the Product Maintenance Instructions.
Damage & Wear caused by:
- Commercial Use.
- Abuse/abnormal wear including, pet scratches, indenting from “high heels,” dropped or dragged heavy objects, improper maintenance, failure to protect entry & high wear areas with mats, furniture legs, etc. as reviewed in the Product Maintenance Instructions.
- Any subsequent site refinishes compatibility/penalization issues, as this is the site installer/refinisher’s responsibility to:
- Adequately test the finish they propose to use for proper adhesion bond and,
- To get approved by the end user, the look of the finish they intend to use before actually re-finishing the floor.
In the event of a claim, the claim form must be submitted through the company from which the flooring was purchased. Upon receipt of the written claim, Easiklip will act expeditiously to settle the matter but reserves the right to physically inspect the floor and remove the samples for a lab test. Easiklip shall report its findings back to you within 60 days of receipt of the written claim.
- The manufacturer warrants this flooring, within industry Standards #1, to be:
- Free from defects in materials and workmanship when it leaves our possession.
- Of the correct wood grade.
- Of the finish quality represented in our samples and our technical specifications.
- Between 6%-9.5% moisture content as taken from the box.
#1 Standard industry trade practices allow up to 5% of the flooring shipped to contain milling, handling, finish or grade defects. This warranty applies only to that material more than 5% that is deemed to be defective. (When ordering flooring, it is standard trade practice to order 7-10% more flooring than actual coverage needed to allow for cross-cutting and fitting waste as well as allowing the installer to set aside any substandard pieces.
Product Warranty – “The Fine Print”:
Easiklip neither assumes nor authorizes any other person to assume for it any other obligation in connection with the sale of this product. This writing is the complete and exclusive statement of the warranty and is instead of all other express and statutory warranties.
Any implied warranties, including, but not limited to the implied warranties, merchantability, and fitness for a particular purpose are limited in duration to the duration of this express warranty. Some states do not allow limitations on how an implied warranty lasts, so the above limitation may not apply to you. Easiklip’s obligation under this warranty shall be limited to, at its options, providing replacement of shortages, exchange of defective products or refund of purchase price for flooring with visible defects returned to the manufacturer before installation.
For flooring with defective finish issues discovered after installation and not visible before installation, Easiklip, at its option, will either repair or replace the defective flooring or refinish the defective finish. Easiklip assumed no liability for incidental or consequential damages. However, some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion may not apply to you.
The sole purpose of the remedy provided herein is the replacement/repair of defective products or refund of purchase price. This remedy shall be the buyer’s exclusive remedy and shall not be deemed to have failed of its essential purpose so long as Easiklip is willing to replace/repair such defective goods or refund the purchase price.
This warranty does not apply to any product or products designated as seconds, special or nonstandard items. Any product or products so identified are sold “as is.”
To obtain performance of these warranty obligations, the person seeking performance should contact Easiklip by letter or telephone:
Easiklip Floors North America Head Office
8280 Manitoba St, Vancouver, BC Canada
ATTENTION: Warranty Department
This limited warranty gives you specific legal rights, and you may also have other rights, which vary, from state to state. Interpretations – this sale shall be governed solely by the terms and conditions herein set forth which shall prevail over any conflicting terms and conditions of the buyer, any statement in the buyer’s purchase order, notwithstanding. All prior writings, representations or negotiations concerning the subject matter are deemed to be merged herein. The failure of either party to enforce any of the provisions of this agreement shall not be construed as a waiver of such provision or the right of any party after that to enforce every provision. The terms of this agreement may not be extended, discharged, amended or modified, anyway, except by a writing signed by an authorized representative of each party. This agreement shall be construed by the laws of the province of British Columbia.
Unlike many conventional engineered floors which are made of thin pieces of cheap wood glued together at high temperatures, Easiklip is a solid wood flooring. It’s no secret that engineered floors contain volatile organic compounds and harmful chemicals like formaldehyde. Because our floors contain no such substances, our floors are good for your health and good for the environment.
Where is it produced
How long does it last
Easiklip should last 50-70 years minimum
How does pricing compare to other floors
Please see our Pricing Comparison page
Where should I NOT install Easiklip
Wet rooms (bathroom, sauna...)
What rooms can I install Easiklip in
Rooms in which the floor is flat, hard and dry. The temperature should be around 20°C and the humidity between 50 and 60%
Is Easiklip an engineered flooring?
No, it's a solid hardwood
How does it work?
Please refer to our How To Install page
How can I pay for my order?
We accept Paypal and all major credit cards.
What is the order process?
Flooring may be ordered and purchased online using Paypal, or Credit Cards of all types. Simply add products to your online shopping cart and complete the checkout process. Any flooring that is on “Backorder” may be purchased today and will become available on the date specified on the product page. Any “in stock” products may be ordered today and will be shipped or ready for pickup within 3-5 business days
Can I use easiklip flooring outside?
No. Our flooring is for indoor applications only.
Can I see the product before purchasing it?
Yes, please contact us via our Contact page or open a chat with us. We'd be happy to schedule a time for you to come by our warehouse and view the product. Regrettably, we don't yet have a showroom in Canada or the United States.
How do I install it
Installation is quick and easy. Please refer to our How To Install page
What are the tools and supplies I need to install my Easiklip flooring
You will need a tape measure, N IOSH-designated dust mask, 15mm wedges, broom, hand saw, eye protection, transition and wall mouldings.
We recommend using a 2mm underlayment and damp-proof membrane to protect your Easiklip wood floor against moisture leaking up from your subfloor.
Can I install over top of carpet or other existing flooring
For installation over existing flooring, the floor humidity must be 10% maximum
For installation over a concrete floor, the humidity of the concrete floor can't be above 2.5/3%
The support has to be flat, hard, dry and free of dust
Carpet and other flexible coatings have to be removed
What type of underlay do I need
You need a damp proof membrane and a minimum 2mm underlay
Can I install in a basement
Yes. You have to install a 2mm underlay and a vapour barrier (damp proof membrane)
What if any of my boards are damaged when I unpack them?
Do I Need glue or nails
Nope. Our floors clip together with a tongue and groove system coupled with aluminum clips. There is no fussy stuff!
Can I install Easiklip myself
Yes, that's why we call it "Easi"
How long will installation take?
For most average people, we estimate 1-2 hours of labour for every 100 sq ft of installed flooring. You'll likely get faster as you go!
Can I hire someone else to install my Easiklip floor for me?
Yes, of course. Please contact us if you'd like some recommendations for qualified installers in your area.
What cleaning supplies should I use on my floor
For daily maintenance, the floor can be vacuumed or swept
Don't use aggressive cleaning agents
Never use ammonia or chlorine
Use a wet rag if necessary
How can I repair my floor if one or multiple boards are damaged?
We always recommend you purchase 5-8% more flooring than you think you need in case you damage your floor at any point. To replace any damaged boards, remove all baseboards and begin to pull up your Easiklip flooring in the opposite direction you installed it, beginning with the last board you installed. As you lift each board, number it on the underside so you can remember the sequence of each board so you don't end up having to cut down and waste any of your existing undamaged floor. Trim your replacement boards to match the length of the boards you will be replacing. Once you reach the damaged area, replace the damaged boards with new boards of the same lengths and re-lay the remaining boards.
How should I remove my floor
Remove it in reverse to how you installed it. If you are planning to do a renovation and wish to remove your flooring so as to not damage it, you will want to remember the order the boards were installed in. for this, we recommend that you number your boards on the underside with a jiffy marker or similar as you remove them
How can I package and store my floor during transportation
Package your flooring in long boxes that allow the flooring to remain flat. Transporting the flooring on any of it's sides can easily cause damage to the tongue and groove board edges. We recommend that you wrap all boards with newspaper or a flexible foam to prevent boards from scratching each other.
What is the return policy?
Refer to our "30 day money back Guarantee"
I have questions regarding purchasing, shipping, installation, maintenance or repair. Who should I contact?
Give us a call 1-604-366-8578 or chat with us online.
Please see our Easiklip Warranty page